Icing Sugar Powder Production Line 2.5ton per hour 60 mesh

Icing sugar is a white powdered sugar. Powdered sugar particles are very fine, while about 3~10% of the starch mixture (generally corn flour), can be used as condiments or make a variety of delicious folk snacks, moisture-proof and prevent the effect of tangled sugar granules.
Powdered sugar can also be filtered directly with a mesh sieve, and the direct sieve is used as a surface decoration on the finished pastry.

There are two main production methods of powdered sugar, one is the spray drying method, that is, the white sugar is made into a high-concentration aqueous solution, through vacuum spray, drying, with uniform powder, good solubility characteristics, but the production cost is high, the equipment and process requirements have higher requirements, only a few developed countries in Europe and the United States have a certain amount of production. Another way is to directly use the pulverizer to crush white sugar or rock sugar.

Because of its fine grain, powdered sugar is easy to absorb water and caking. Therefore, it is usually solved in two ways, one is the traditional adding a certain proportion of starch in the powdered sugar, so that the powdered sugar is not easy to coagulate, but this will destroy the flavor of the powdered sugar; Another way is to put the powdered sugar in a small aluminum film bag, and then put it in a large package sealed storage. Using a small bag at a time, powdered sugar usually does not clump until it comes into direct contact with air.

What is a Commercial Sugar Grinder?

A commercial sugar grinder, also known as a commercial sugar mill, is a machine used in the food processing industry to grind granulated sugar into a fine powder. It is commonly used in the production of confectionery, baked goods, and other sweet treats. The grinder typically consists of a rotating shaft with multiple blades or burrs that crush and grind the sugar into a uniform powder. Commercial sugar grinders come in various sizes and capacities to meet the needs of different food manufacturers and can be manually operated or fully automated.

“Sugar” this word actually means much more than we commonly understand. Normally we think about “Saccharose” and know always as “Sugar”. Sugar is greatly grind for various usages, such as for chocolate, jams or jellies, ice cream, drinks or bakery products, like cookies.

Sugar crusher machine has becomes the universal equipment especially used widely in sugar and salt production. Fine grind sugar make sure very short time for melting during the process. And it can be used also to decorate desserts. Various particle sizes are requested for various usage. And LK Mixer can tally meet those various requirements.

In the past, only conventional pin mills were used. Today, considerably higher throughputs can be obtained using so-called blast mills.

Customize according to your request:

• Logos, package can be customized, OEM your brand;
• Can connect with packing Machine, sealing machine, Drying Machine, Sifter Vibrating Screen machine, or any other machines in procedure;
• Connector with other machines can be customized.
• Capacity can be customized;
• Procedure progress can be customized;
• Voltage can be customized;
• Special functions can be customized;
• Chargers and cables length can be customized;
• Electric cabinet can be customized;

Consists of 4 major portions:

Pim Mill, Pneumatic conveying system, Blower & dust collector, and Rotary airlock valve. The Sugar Crusher & Grinder complete system make sure the retention of the properties of Sugar such as color and taste. At the same time, it is with no dust to protect well for enviornment. Sugar can be designed to ground to two stages. First stage is to do coarse grinding, and then the sugar goes to second stage for re-grinding into more fine particles and powders. Finally, sugar goes for packing.

According to the size of the crushed material, coffee grinding machine can be divided into coarse crushing, and also the ultra- fine crushing.

Corn grinder machine, cyclone separator, dust colloector and rotary valve, these portions consists of dust collector grinder group to achieve the purpose of the crusher in the form of high-speed and high effect impact.  

Hopper or Feed Inlet

Hopper is for raw material feeding to the grinding machine. We have automatically feeder that can totaly automatic transfer the raw material into the Hopper of the grinding machine. This is the parts that beginning of the process.

Crushing Chamber

Chamber is working chamber, this is the part that the powders and materials are grind down into powders.

Door or Window

The door or window that observable. This two parts helps us can see clearly the inner working status of chamber. With this two parts you can know if the whole working process are in normal running or not.

Mesh Screen

The screen is part of filters for powder in mm or in mesh. We have vibrating table which can connect with the output of the outlet of grinder, so that can realize automatically production line.

Motor

Motors we have UL Certification, CE Certification or if any Certification you need, we can book the Certification motors for you. So Please kindly let us know if the voltage and motors certification need customization when you send inquiry to us.

Cooling Component (There are 3 types of cooling system):

1.Water cooling Jacket:

Cooling parts are double wall jacket for cool water,

2. Air cool inlet:

also have inlet of cool air for cooling system to keep the temperature in a settle degree. Such as to keep the grinding process temperature in -4~-8 degrees centigrade. The air inlet can connect directly with the air cooler machine.

3. Liquid nitrogen cooling

Liquid nitrogen cooling is a process of using liquid nitrogen (LN2) to cool or freeze materials and equipment. Liquid nitrogen is a colorless, odorless, and extremely cold substance that boils at -196°C (-320.8°F) at atmospheric pressure. When used for cooling purposes, liquid nitrogen is typically stored in a vacuum-insulated container, such as a dewar flask, to prevent it from boiling off too quickly.

The process of liquid nitrogen cooling involves transferring the liquid nitrogen to a cooling chamber or container, where it evaporates rapidly and removes heat from the surrounding materials. This rapid evaporation creates a cooling effect that can be used to cool or freeze various materials, such as food products, electronics, and biological samples.

Liquid nitrogen cooling is commonly used in a variety of industries, including food processing, biotechnology, and electronics. In food processing, it can be used to rapidly freeze food products to preserve their quality and freshness. In biotechnology, it is used to preserve biological samples and to cool equipment during experiments. In electronics, it is used to cool computer chips and other components to improve their performance and reliability.

4. Discharge Port

The discharge port if for material result granules output. It is the finish of grinding and before screening. The grinder discharge port is the outlet or opening on a grinder machine through which the ground material exits the grinding chamber and is collected. It is typically located at the bottom of the grinding chamber and may be connected to a collection container or system. The size and shape of the discharge port can vary depending on the type and model of the grinder machine, as well as the intended application. In some cases, the discharge port may be adjustable to control the size and consistency of the ground material being produced. Proper design and management of the discharge port are critical to ensuring the efficient operation of the grinder machine and achieving the desired particle size and consistency of the ground material.

Cinnamon Sugar Grinder:

A cinnamon sugar grinder is a type of commercial grinder that is specifically designed for grinding cinnamon sticks and granulated sugar together to create a fragrant and sweet seasoning blend. Cinnamon sugar is a popular seasoning that is commonly used in baking and dessert recipes, as well as on toast, pancakes, and other breakfast foods.

Cinnamon sugar grinders typically feature a specialized grinding mechanism that is designed to handle the tough and fibrous texture of cinnamon sticks, as well as the granulated texture of sugar. The grinder may also feature a heating element or other mechanism to help release the natural oils and flavors of the cinnamon during the grinding process.

To use a cinnamon sugar grinder, the operator simply feeds cinnamon sticks and granulated sugar into the machine through the feeding mechanism. The grinding mechanism then grinds the cinnamon sticks and sugar together into a fine powder, which is collected in a container or receptacle at the bottom of the machine. The resulting cinnamon sugar blend can be used immediately or stored for later use.

Cinnamon sugar grinders are commonly used in commercial bakeries, restaurants, and food production facilities, as well as in home kitchens. They are an efficient and convenient way to create a high-quality cinnamon sugar blend with consistent particle size and flavor.

Home Sugar Grinder

A home sugar grinder is a kitchen appliance that is designed for grinding granulated sugar into a fine powder for use in baking and cooking. Home sugar grinders are typically compact, easy to use, and affordable, making them a popular choice for home bakers and cooking enthusiasts.

Home sugar grinders may feature a variety of grinding mechanisms, including blades, burrs, or even mortar and pestle-style grinding. Some models may also include adjustable settings for controlling the particle size of the ground sugar.

To use a home sugar grinder, the operator simply adds granulated sugar to the grinder and activates the grinding mechanism. The ground sugar is then collected in a container or receptacle, ready to be used in a variety of recipes.

In addition to grinding sugar, many home sugar grinders can also be used to grind other dry ingredients such as spices, coffee beans, and nuts, making them a versatile tool in the kitchen.

When choosing a home sugar grinder, it is important to consider factors such as size, durability, and ease of use. Some models may also include additional features such as built-in scales or timers to help streamline the baking and cooking process.

Overall, a home sugar grinder can be a valuable addition to any kitchen, providing a convenient and efficient way to create high-quality powdered sugar for a variety of culinary application.

Small Machine Packing:

Small machine packed with export fumigation-free wooden cases, goes with bulk shipment or in container.

When packing small machines for sea shipment, it is important to take measures to ensure that the machines are protected from damage during transit. Here are some general steps that a manufacturer may follow when packing small machines for sea shipment:

1. Clean and dry the machine: Before packing, the machine should be thoroughly cleaned and dried to prevent any moisture or debris from causing damage during transit.
2. Disassemble the machine: If possible, the machine should be disassembled into its component parts to reduce its overall size and make it easier to pack.
3. Wrap the machine in protective material: The machine should be wrapped in a layer of protective material, such as bubble wrap or foam, to protect it from scratches and impact during transit.
4. Place the machine in a sturdy box: The wrapped machine should then be placed in a sturdy box that is appropriate for the size and weight of the machine. The box should be made of durable material, such as corrugated cardboard or plywood, and should be able to withstand the rigors of sea transit.
5. Add packing material: The box should be filled with packing material, such as packing peanuts or air pillows, to provide cushioning and prevent the machine from shifting during transit.
6. Seal the box: The box should be securely sealed with high-quality packing tape to prevent it from opening during transit.
7. Label the box: The box should be clearly labeled with the machine’s name, weight, and any other relevant information, as well as the destination address and contact information.

Overall, the goal is to pack the small machine in a way that will protect it from damage during transit and ensure that it arrives at its destination in good condition. It is important to follow proper packing procedures and use high-quality packing materials to minimize the risk of damage during sea shipment.

Large Machine Packing:

Packing a large machine for sea shipment can be a complex and challenging task. However, with careful planning and attention to detail, it is possible to pack a large machine for sea shipment in a way that will ensure that it arrives at its destination in good condition. Here are some general steps that a manufacturer may follow when packing up a large machine for sea shipment:

1. Clean and prepare the machine: Before packing, the machine should be thoroughly cleaned and prepared. All fluids, such as oil or coolant, should be drained, and any loose or detachable parts should be removed.
2. Disassemble the machine: If possible, the machine should be disassembled into its component parts to reduce its overall size and make it easier to pack. Each part should be carefully labeled and numbered to ensure that it can be easily reassembled at the destination.
3. Protect delicate parts: Delicate or fragile parts should be wrapped in protective material, such as bubble wrap or foam, to protect them from damage during transit.
4. Build a custom crate: A custom crate should be built around the machine to provide a secure and sturdy enclosure. The crate should be made of durable material, such as plywood, and should be designed to fit the machine snugly. The crate should also include braces or supports to prevent the machine from shifting during transit.
5. Add cushioning material: The crate should be filled with cushioning material, such as packing peanuts or air pillows, to provide extra protection and prevent the machine from moving or shifting during transit.
6. Securely fasten the machine: The machine should be securely fastened to the crate to prevent it from moving or shifting during transit. This may involve using straps, bolts, or other fasteners to hold the machine in place.
7. Seal and label the crate: The crate should be securely sealed with high-quality packing tape, and should be clearly labeled with the machine’s name, weight, and any other relevant information. The destination address and contact information should also be clearly marked on the crate.

Overall, packing a large machine for sea shipment requires careful planning and attention to detail. It is important to use high-quality materials and follow proper packing procedures to ensure that the machine arrives at its destination in good condition. A professional packing and shipping company may be consulted to ensure that the machine is properly packed and prepared for sea shipment.